Category Archives: General

Lift Assembly

If there are problems with the lift like shaking, noise etc, you can disassemble the lift and clean the interior. You can also calibrate the wheel bearings to make the lift tighter or looser.

Remove Lift Assembly Video 1

Remove Lift Assembly Video 2 – Wheel Bearings

Error Message: Sensor Can not be found

Error Message:  Sensor can not be found. Check the cabling and sensor. The sensor may be broken.

The main controller has problems detecting signals from the sensor. There is something wrong with the cable from the controller to the sensor or the sensor itself.

  1. Check the heating chamber. Look upside to see the sensor. If it looks broken, you must change it.
  2. Check the cables going from the controller to the sensor.

 

Using a Voltmeter to check cable connectivity 1

Using a Voltmeter to check cable connectivity 2